产品列表
 热门产品
  • ���������Ϣ
当前位置：
 首页 - 产品中心 - 钻床铣夹头

钻床铣夹头
产品名称：钻床铣夹头

库存数量：10000 个
  产品介绍：
New Drill Mill Chucks
Now introducing our "NEW DRILL MILL CHUCK", which will add some more features of quality to our current drill mill chucks, such as higher rigidity and higher accuracy, without sacrificing any of features of these drill mill chucks which have long been appreciated by the customers for higher quality machining.

1mm chucking range per one collet.
Super Rigidity-Super Precision.
By setting the coolant seal screw, the high Pressure spindle-through coolant of 7.0MPa(70kg/cm2) can be used.
High balancing.
Being flat on top between locknut surface and collet surface.

Model L Capacity Lock-nut
O.D
15T-NDC5 35 0.55.0 13
15T-NDC7S 485575 0.57.0 22
15T-NDC10 52 0.510.0 33
S20T-NDC7 456075 0.57.0 25
S20T-NDC10 456075 0.510.0 33
S20T-NDC13 4575 0.513.0 36
S20T-NDC16 60 2.516.0 42
BT30-NDC7S 6090120 0.57.0 22
BT30-NDC7 6090120 0.57.0 25
BT30-NDC10 6090120 0.510.0 33
BT30-NDC13 6090120 0.513.0 36
BT30-NDC16 75105120 2.516.0 42
BT30-NDC20 75105120 3.520.0 52
BT30-NDC25 90120 5.025.0 62
BT35-NDC16 75 2.516.0 42
BT35-NDC20 75 3.520.0 52
BT35-NDC25 90 5.025.0 62
BT40-NDC7 60 0.57.0 25
BT40-NDC10 6090120 0.510.0 33
BT40-NDC13 75105135 0.513.0 36
BT40-NDC16 75105135 2.516.0 42
BT40-NDC20 75105135 3.520.0 52
BT40-NDC25 75105135 5.025.0 62
BT40-NDC32 105135 5.032.0 76
BT50-NDC10 90120150 0.510.0 33
BT50-NDC13 90120150 0.513.0 36
BT50-NDC16 105135165 2.516.0 42
BT50-NDC20 105135165 3.520.0 52
BT50-NDC25 105135165 5.025.0 62
BT50-NDC32 105135165 5.032.0 76
New Drill Mill Chuck with Straight Shank (for Side Lock)

Model L Capacity Lock-nut
O.D
S16-NDC7S 85115 0.57.0 22
S20-NDC7S 105135 0.57.0 22
S20-NDC10 115145 0.510.0 33
S20-NDC13 115145 0.513.0 36
S25-NDC10 125 0.510.0 33
S25-NDC13 135165 0.513.0 36
S25-NDC16 130 2.516.0 42
S32-NDC13 130160 0.513.0 36
S32-NDC16 140180 2.516.0 42
S40-NDC20 165 3.520.0 52
S42-NDC20 165 3.520.0 52
S42-NDC25 180 5.025.0 62
New Drill Mill Chuck with Straight Shank (for Milling Chucks)

Model L Capacity Lock-nut
O.D
ST6-NDC5 6080 0.55.0 13
ST12-NDC5 75110 0.55.0 13
ST16-NDC7S 75105 0.57.0 22
ST20-NDC7S 95125 0.57.0 22
ST20-NDC10 100130 0.510.0 33
ST20-NDC13 115145 0.513.0 36
ST25-NDC10 120 0.510.0 33
ST25-NDC13 125155 0.513.0 36
ST25-NDC16 130 2.516.0 42
ST32-NDC13 125155 0.513.0 36
ST32-NDC16 130160 2.516.0 42
ST42-NDC20 165205 3.520.0 52
ST42-NDC25 180 5.025.0 62
New Drill Mill Chuck with MT Shank

Model L Capacity Lock-nut
O.D
M1T-NDC7S 50 0.57.0 22
M2T-NDC7S 45 0.57.0 22
M2T-NDC10 50 0.510.0 33
M3T-NDC10 50 0.510.0 33
M2T-NDC13 55 0.513.0 36
M3T-NDC13 50 0.513.0 36
M4T-NDC13 45 0.513.0 36
M4T-NDC16 55 2.516.0 42
M4T-NDC20 70 3.520.0 52
M5T-NDC20 60 3.520.0 52
M4T-NDC25 100 5.025.0 62
M5T-NDC25 80 5.025.0 62
New Drill Mill Chuck with Internal Threaded MT Shank

Model L Capacity Lock-nut
O.D
M2M-NDC7S 45 0.57.0 22
M3M-NDC10 50 0.510.0 33
M3M-NDC13 50 0.513.0 36
M4M-NDC13 45 0.513.0 36
M4M-NDC16 55 2.516.0 42
M4M-NDC20 70 3.520.0 52
New Drill Mill Chuck with Adjustable Threaded Shank

Model L Capacity Lock-nut
O.D
A8-NDC5 33 0.55.0 13
A16-NDC7S 45 0.57.0 22
A19-NDC7S 45 0.57.0 22
A19-NDC10 50 0.510.0 33
A20-NDC10 50 0.510.0 33
A22-NDC10 50 0.510.0 33
A22-NDC13 55 0.513.0 36
A25-NDC13 55 0.513.0 36
A26-NDC13 55 0.513.0 36
A28-NDC13 55 0.513.0 36
A26-NDC16 60 2.516.0 42
A28-NDC16 60 2.516.0 42
A35-NDC16 60 2.516.0 42
A35-NDC20 70 3.520.0 52
Special sizes are also available of different shank diameters, length, or combination of both.
Collet, Spanner and Length Adjustment Bolt are not included in the above. They are separate accessories.
For NDC7S series, Collet end level is lower than the Nut end level.
Coolant-Sealing Back-up Screw cannot be installed.
New Drill Mill Chuck with Jacobs Taper Shank

Model L Capacity Lock-nut
O.D
JT0-NDC5 35 0.55.0 13
JT1-NDC5 45 0.55.0 13
JT1-NDC7S 60 0.57.0 22
JT2S-NDC10 70 0.510.0 33
JT6-NDC13 80 0.513.0 36
JT6-NDC16 85 2.516.0 42
Special sizes are also available of different shank diameters, length, or combination of both.
Collet, Spanner are not included in the above. They are separate accessories.
For NDC7S series, Collet end level is lower than the Nut end level.
Coolant-Sealing Back-up Screw cannot be installed.
上一个产品：调节器    下一个产品：YCC 筒夹