OKI OB-PN wire-OB-PN- EDM Coated Wire-ZhanYu Moulds & Hardware Accessories Co.,Ltd.

This wire is not coated with paraffin.
It is ideal mainly for a wire EDM machine that is used in combination with an AT unit made by Mitsubishi Electric.
This wire provides the work material with a fine finish and also realizes superior automatic threading ability.
Because the wire is not coated with paraffin, slipping of the wire is minimized, realizing stable wire feed. Very high automatic threading performance is realized when an AT unit is used with the FA series, RA90AT, or other EDM machine made by Mitsubishi Electric.

OB -	Wire diameter symbol		Type symbol PN		(Bobbin symbol)		OKI control code

Wire diameter symbol	Type symbol	Standard wire diameter mm	Wire diameter tolerance mm	Tensile strength MPa	Fracture load N	Conductivity %
7	PN	0.07	+/-0.001	980(Min)	3.77(Min)	22(Min)
10		0.10			7.7(Min)
15		0.15			17.4(Min)
20		0.20			30.8(Min)
25		0.25			48.2(Min)
30		0.30			69.3(Min)

Bobbin symbol	Standard QTY kg	0.07mm	0.10mm	0.15mm	0.20mm	0.25mm	0.30mm
P-3R	1.6				—	—	—
P-3R	3	—					—
P-5R	5	—	—	—
TP-5R (Note1)	5	—	—	—
P-10	10	—	—	—
P-10T (Note1)	10	—	—	—
K-200 (Note2)	15	—	—	—
P-15	20	—	—	—

is a standard stock product, and

is a product on order.

Forward Product : OKI OB-7S wire Next Product : OKI OB-PZN wire